Streptavidin-Biotin Immunostaining of Frozen Tissue Sections

Streptavidin-Biotin Immunostaining of Frozen Tissue Sections

Streptavidin-Biotin Immunostaining of Frozen Tissue Sections

 Download PDF

For use with unconjugated monoclonal and polyclonal antibodies.

This method provides a general procedure for use with the majority of Bio-Rad reagents. In some cases specific recommendations are provided on product datasheets, and these methods should always be used in conjunction with product and batch specific information provided with each vial. Please note that a certain level of technical skill and immunological knowledge is required for the successful design and implementation of these techniques - these are guidelines only and may need to be adjusted for particular applications.

Reagents

1. 0.3% H2O2, 70% methanol in TBS
1 ml of 30% H2O2 per 100 ml methanol/TBS.
2. TBS stock solution (10x)
NaCl, 87.66 g
Tris base, 60.55 g
Distilled water, 1 liter
Adjust pH to 7.4 using concentrated HCl.

Method

  1. In most cases, Bio-Rad recommends that tissues are snap-frozen in liquid nitrogen, then prepared as 4-6 µm sections using a cryostat.
  2. Allow sections to air dry for at least 1 hour.
  3. Fix sections in dry acetone for 15 minutes. Allow to evaporate for 10 minutes. Block endogenous peroxidase (if necessary) by immersing slides in 0.3% H2O2 in 70% methanol/TBS for 30 minutes. Bio-Rad offer peroxide blocking reagent (BUF017B). In addition to that Bio-Rad also offers a ready to use avidin-biotin blocking system (BUF016) to minimize non-specific staining caused by endogenous avidin, biotin present in the tissue. Wash once in TBS.
  4. Incubate sections for 10 minutes in 10% normal serum from the species in which the secondary was raised. Tap excess serum off the slides before staining.
  5. Incubate sections with primary antibody for at least 30 minutes at room temperature in a humid chamber or overnight at 4°C. Wash 3 times in TBS.
  6. Add biotinylated secondary antibody at the recommended dilution (see specific datasheet for details). Incubate for at least 30 minutes at room temperature. Wash 3 times in TBS.
  7. Add enzyme-conjugated streptavidin at the recommended dilution (see specific datasheet for details). Incubate for at least 30 minutes at room temperature. Wash 3 times in TBS.
  8. Incubate with the appropriate substrate solution for the recommended period of time (Bio-Rad suggests the use of DAB substrate with HRP-conjugated antibodies, and Fast Red/Napthol AS-MX for Alkaline Phosphatase conjugated antibodies). Wash once in water.
  9. Counterstain with hematoxylin for 1-10 minutes. “Blue” with running water for 5 minutes.
  10. Mount in aqueous mounting medium, or alternatively dehydrate through a graded series of alcohols and xylene/solvent, and mount in synthetic mountant.

Notes

  • Do not allow slides to dry out after the fixation step, as drying will result in damage to the tissue structure.
  • Beware, certain substrates are soluble in alcohol – please refer to supplier information for details.
  • Appropriate controls should always be carried out. It may be useful to include a sample in which no primary antibody is used at all, in order to determine any non-specific binding of the secondary reagent to the target tissue.


Related pages:

503 Service Unavailable

No server is available to handle this request.

503 Service Unavailable

No server is available to handle this request.