Infliximab antibody | AbD20436
A microtiter plate was coated over night with various antigens at a concentration of 5 μg/ml. After washing and blocking with PBST+5% BSA, detection was performed using Human anti infliximab (clone 20436) at a concentration of 2 μg/ml followed by an HRP-labelled anti-His tag in HISPEC assay diluent (BUF049A) and a fluorogenic peroxidase substrate.
A microtiter plate was coated over night with human IgG1/kappa, human IgG1/lambda, cetuximab or infliximab at a concentration of 5μg/ml. After washing and blocking with PBST+5% BSA, detection was performed using Human anti infliximab (clone AbD20436) titrated to the given concentrations in PBST+10% human serum, followed by an HRP-labelled anti-His tag in HISPEC assay diluent (BUF049A) and a fluorogenic peroxidase substrate.
A microtiter plate was coated over night with Human anti infliximab (clone AbD20436) at a concentration of 5 µg/ml. After washing and blocking with PBST+5% BSA, 10% human serum was added spiked with increasing concentrations of infliximab. Detection was performed using HRP-conjugated Human anti infliximab, clone 19370_hIgG1, (HCA215) in HISPEC assay diluent (BUF049A) and a fluorogenic peroxidase substrate. HRP-conjugation of the antibody used in this assay was performed using a LYNX Rapid HRP Antibody Conjugation Kit (LNK001P).
A microtiter plate was coated over night with Human anti infliximab (clone AbD20436) at a concentration of 0.6 μg/ml. After washing and blocking with PBST+5% BSA, 10% human serum was added spiked with increasing concentrations of infliximab. Detection was performed using HRP-conjugated Human anti infliximab, clone AbD20436_hIgG1 (HCA233) in HISPEC assay diluent (BUF049A) and a fluorogenic peroxidase substrate. HRP-conjugation of the antibody used in this assay was performed using a LYNX Rapid HRP Antibody Conjugation Kit (LNK001P).
A microtiter plate was coated over night with TNFα at a concentration of 1 μg/ml. After washing and blocking with PBST+5% BSA, a pre-incubated mixture of infliximab (IFX, 0.3 μg/ml) plus increasing concentrations of Human anti infliximab (clone AbD20436) was added. Free infliximab, still capable of binding to the TNFα-coated plate, was detected using Goat anti Human IgG F(ab')2:HRP (0500-0099).
Filter by Application:
E ResetHuman anti Infliximab
- Product Type
- Monoclonal Antibody
- Clone
- AbD20436
- Isotype
- HuCAL Fab monovalent
- Specificity
- Infliximab
Antibody Quality and Performance Guarantee
| Human anti Infliximab, clone AbD20436, is an affinity matured anti-idiotypic antibody in monovalent Fab format that specifically recognizes free infliximab but not infliximab bound to its target, Tumor Necrosis Factor Alpha (TNFα). It can be used in bioanalytical assays to measure the levels of infliximab and biosimilar products, such as Inflectra and Renflexis, in patient samples. Human anti Infliximab, clone AbD20436 inhibits the binding of infliximab to TNFα and can be used as a capture antibody in a pharmacokinetic (PK) assay in the bridging format to measure free drug. Infliximab (branded as Remicade®) is a chimeric IgG1 kappa monoclonal antibody approved for the treatment of psoriasis, Crohn's disease, ankylosing spondylitis, psoriatic arthritis, rheumatoid arthritis and ulcerative colitis. Infliximab is directed against TNFα and acts by blocking the binding of TNFα to its receptors, resulting in a down-regulation of the inflammatory response associated with autoimmune diseases. View a summary of all anti-infliximab antibodies. |
- Product Form
- A monovalent human recombinant Fab selected from the HuCAL? phage display library, expressed in E. coli. The antibody is tagged with a DYKDDDDK tag and a HIS-tag (HHHHHH) at the C-terminus of the antibody heavy chain. This antibody is supplied as a liquid.
- Preparation
- Metal chelate affinity chromatography
- Source
- E.coli
- Buffer Solution
- Phosphate buffered saline.
- Preservative Stabilisers
- 0.09% Sodium Azide (NaN3)
- Immunogen
- Infliximab.
- Affinity
- The monovalent intrinsic affinity of this antibody was measured as KD=0.12 nM by real time, label-free molecular interaction analysis on immobilized infliximab.
- Approx. Protein Concentrations
- Antibody concentration 0.5 mg/ml.
- Regulatory
- For research purposes only
- Guarantee
- 12 months from date of despatch.
- Acknowledgements
- This product and/or its use is covered by claims of U.S. patents, and/or pending U.S. and non-U.S. patent applications owned by or under license to Bio-Rad Laboratories, Inc. See bio-rad.com/en-us/trademarks for details.
Remicade is a registered trademark of Janssen Biotech Inc. Inflectra is a registered trademark of Hospira, a Pfizer Company. RENFLEXIS is a trademark of Merck Sharp & Dohme Corp.
His-tag is a registered trademark of EMD Biosciences.
This product is shipped at ambient temperature. It is recommended to aliquot and store at -20°C on receipt. When thawed, aliquot the sample as needed. Keep aliquots at 2-8°C for short term use (up to 4 weeks) and store the remaining aliquots at -20°C.
Avoid repeated freezing and thawing as this may denature the antibody. Storage in frost-free freezers is not recommended.
Avoid repeated freezing and thawing as this may denature the antibody. Storage in frost-free freezers is not recommended.
This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visit the antibody protocols page.
| Application Name | Verified | Min Dilution | Max Dilution |
|---|---|---|---|
| ELISA |  |
Where this product has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the product for use in their own system using appropriate negative/positive controls.
- Technical Advice
- Recommended protocols and further information about HuCAL recombinant antibody technology can be found in the HuCAL Antibodies Technical Manual
- ELISA
- This product may be used in an indirect ELISA system or as a capture reagent in PK assay development together with HRP-conjugated HCA215 or HCA233 as the detection reagent.
Protocol: PK bridging ELISA to measure free drug
| Description | Product Code | Applications | Pack Size | List Price | Your Price | Quantity | |
|---|---|---|---|---|---|---|---|
| Hispec Assay Diluent | BUF049A | E IY | 50 ml | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | Hispec Assay Diluent | ||||||
| Human anti Infliximab | HCA213 | E | 0.1 mg | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | Human anti Infliximab | ||||||
| Human anti Infliximab | HCA215 | E | 0.1 mg | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | Human anti Infliximab | ||||||
| Human anti Infliximab | HCA233 | E | 0.1 mg | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | Human anti Infliximab | ||||||
| LYNX Rapid HRP Antibody Conjugation Kit | LNK002P | CJ | 3 Conjugations For 400µg Antibody | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | LYNX Rapid HRP Antibody Conjugation Kit | ||||||
| Recombinant Human TNF Alpha | PHP051 | E FN WB | 50 µg | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | Recombinant Human TNF Alpha | ||||||
- Synonyms
- REMICADE®
- Licensed Use
- For in vitro research purposes and for commercial applications for the provision of in vitro testing services to support preclinical and clinical drug development. Any re-sale in any form or any other commercial application needs a written agreement with Bio-Rad.
HCA234
164592
1806
If you cannot find the batch/lot you are looking for please contact our technical support team for assistance.
View more products with Infliximab specificity
Please Note: All Products are "FOR RESEARCH PURPOSES ONLY"
Always be the first to know.
When we launch new products and resources to help you achieve more in the lab.
Yes, sign me up