Bevacizumab antibody | AbD16748_hIgG1
A microtiter plate was coated overnight with various antigens at a concentration of 5 μg/ml. After washing and blocking with PBST+5% BSA, Human Anti-Bevacizumab:HRP Antibody, clone AbD16748_hIgG1 (HCA184P) was added at a concentration of 2 μg/ml in HISPEC Assay Diluent (BUF049A). Detection was performed using QuantaBlu Fluorogenic Peroxidase Substrate.
A microtiter plate was coated overnight with recombinant human VEGF protein at a concentration of 1 µg/ml. After washing and blocking with PBST+5% BSA, a pre-incubated mixture of bevacizumab (0.3 μg/ml) plus increasing concentrations of Human Anti-Bevacizumab Antibody, clone AbD16748 (HCA184). Free bevacizumab, still capable of binding to the human VEGF coated plate was detected using Mouse Anti-Human IgG (Fc) CH2 Domain:HRP (MCA647P) in HISPEC Assay Diluent (BUF049A) followed by QuantaBlu Fluorogenic Peroxidase Substrate. Data are shown as the mean of three measurements.
A microtiter plate was coated overnight with Human Anti-Bevacizumab Antibody, clone AbD17976 (HCA182) at a concentration of 1 µg/ml. After washing and blocking with PBST+5% BSA, 10% Human Serum was added spiked with increasing concentrations of bevacizumab. Detection was performed by Human Anti-Bevacizumab:HRP Antibody, clone AbD16748_hIgG1 (HCA184P) at a concentration of 4 µg/ml in HISPEC Assay Diluent (BUF049A) and QuantaBlu Fluorogenic Peroxidase Substrate.
A microtiter plate was coated overnight with bevacizumab at a concentration of 0.5 µg/ml. After washing and blocking with PBST+5% BSA, Human Anti-Bevacizumab Antibody clone AbD16748_hIgG1 (HCA184) in PBST + 10% Human Serum was added. Detection was performed using HRP conjugated bevacizumab at a concentration of 2 µg/ml in HISPEC Assay Diluent (BUF049A) and QuantaBlu Fluorogenic Peroxidase Substrate.
Filter by Application:
E WB ResetHuman anti Bevacizumab
- Product Type
- Monoclonal Antibody
- Clone
- AbD16748_hIgG1
- Isotype
- IgG1
- Specificity
- Bevacizumab
Antibody Quality and Performance Guarantee
| Human Anti-Bevacizumab Antibody, clone AbD16748_IgG1 is a paratope-specific, recombinant anti-idiotypic antibody that specifically recognizes the humanized monoclonal antibody drug bevacizumab and inhibits the binding of the drug to its target, vascular endothelial growth factor A (VEGF-A). The antibody can be used to measure the levels of bevacizumab and biosimilars in serum from patients. A pair of anti-bevacizumab antibodies can be used to develop a pharmacokinetic (PK) bridging ELISA to measure free drug. This antibody is recommended as the detection antibody, paired with Anti-Bevacizumab Antibody in monovalent Fab format, clone AbD17976 (HCA182) as the capture antibody. Bevacizumab (reference product branded as Avastin) is a humanized monoclonal antibody (IgG1/kappa) that inhibits angiogenesis by binding to VEGF-A. VEGF-A is a potent stimulator of angiogenesis of both normal and cancerous cells, and acts as a regulator of vasculogenesis. Bevacizumab is used to treat various cancers, including colorectal, lung, breast, glioblastoma, kidney and ovarian. View a summary of all Anti-Bevacizumab Antibodies. |
- Product Form
- Human IgG1 antibody (kappa light chain) selected from the HuCAL phage display library and expressed in a human cell line. This antibody is supplied as a liquid.
- Preparation
- HCA184G: Purified IgG prepared by affinity chromatography on Protein A
- HCA184: Purified IgG prepared by affinity chromatography on Protein A.
- Buffer Solution
- Phosphate buffered saline.
- Preservative Stabilisers
- 0.01% Thiomersal.
- Immunogen
- Bevacizumab
- Purity
- 97.8% (capillary electrophoresis, reducing conditions).
- Affinity
- The monovalent intrinsic affinity of this antibody is KD=2.1nM as measured by real time, label-free molecular interaction analysis on immobilized Bevacizumab.
- Approx. Protein Concentrations
- Pack Size: 1 mgAntibody concentration 1.0 mg/mlPack Size: 0.1 mgAntibody concentration 0.5 mg/ml.
- Regulatory
- For research purposes only.
- Guarantee
- 12 months from date of despatch.
- Acknowledgements
- This product and/or its use is covered by claims of U.S. patents, and/or pending U.S. and non-U.S. patent applications owned by or under license to Bio-Rad Laboratories, Inc. See bio-rad.com/en-us/trademarks for details.
Avastin is a trademark of Genentech, Inc.
This product is shipped at ambient temperature. It is recommended to aliquot and store at -20°C on receipt. When thawed, aliquot the sample as needed. Keep aliquots at 2-8°C for short term use (up to 4 weeks) and store the remaining aliquots at -20°C.
Avoid repeated freezing and thawing as this may denature the antibody. Storage in frost-free freezers is not recommended.
Avoid repeated freezing and thawing as this may denature the antibody. Storage in frost-free freezers is not recommended.
This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visit the antibody protocols page.
| Application Name | Verified | Min Dilution | Max Dilution |
|---|---|---|---|
| ELISA |  |
Where this product has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the product for use in their own system using appropriate negative/positive controls.
- Technical Advice
- Recommended protocols and further information about HuCAL recombinant antibody technology can be found in the HuCAL Antibodies Technical Manual.
- ELISA
- This product may be used in a direct ELISA or as a detection reagent in a sandwich ELISA, when conjugated to HRP, together with HCA182 as the capture reagent.
Protocol: PK bridging ELISA to measure free drug
This antibody is fully human and can be used as a reference standard in an ADA assay.
Protocol: ADA bridging ELISA.
| Description | Product Code | Applications | Pack Size | List Price | Your Price | Quantity | |
|---|---|---|---|---|---|---|---|
| LYNX Rapid HRP Antibody Conjugation Kit | LNK001P | CJ | 1 Conjugation For 400µg Antibody | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | LYNX Rapid HRP Antibody Conjugation Kit | ||||||
| Human anti Bevacizumab | HCA182 | E | 0.1 mg |
|
Log in | ||
| List Price | Your Price | ||||||
|
|
Log in | ||||||
| Description | Human anti Bevacizumab | ||||||
| Human anti Bevacizumab | HCA185 | E | 0.1 mg |
|
Log in | ||
| List Price | Your Price | ||||||
|
|
Log in | ||||||
| Description | Human anti Bevacizumab | ||||||
References for Bevacizumab antibody
-
Kashiwagi, N. et al. (2017) Method for measuring anti-drug antibody
US Patent Application US20170315118A1
- Synonyms
- Avastin
- Licensed Use
- For in vitro. research purposes and for commercial applications for the provision of in vitro. testing services to support preclinical and clinical drug development. Any re-sale in any form or any other commercial application needs a written agreement with Bio-Rad.
HCA184G
148601
1709
HCA184
155646
1609
If you cannot find the batch/lot you are looking for please contact our technical support team for assistance.
View more products with Bevacizumab specificity
Please Note: All Products are "FOR RESEARCH PURPOSES ONLY"
Always be the first to know.
When we launch new products and resources to help you achieve more in the lab.
Yes, sign me up