Dupilumab antibody | AbD47092
A microtiter plate was coated overnight with various antigens at a concentration of 5 μg/ml. After washing and blocking with PBST + 5% BSA, detection was performed using Human Anti-Dupilumab Antibody, clone AbD47092ad (TZA015) at a concentration of 2 μg/ml followed by an HRP conjugated anti-DYKDDDDK tag antibody in HISPEC Assay Diluent (BUF049A) followed by QuantaBlu Fluorogenic Peroxidase Substrate.
A microtiter plate was coated overnight with dupilumab, human IgG1 kappa control or human IgG4Pro at a concentration of 5 µg/ml. After washing and blocking with PBST + 5% BSA, detection was performed using Human Anti-Dupilumab Antibody, clone AbD47092ad (TZA015) titrated to the given concentrations in PBST followed by an HRP conjugated anti-DYKDDDDK tag antibody in HISPEC Assay Diluent (BUF049A) followed by QuantaBlu Fluorogenic Peroxidase Substrate. HRP conjugation of the antibody used in this assay was performed using a LYNX Rapid HRP Antibody Conjugation Kit (LNK002P). Data are shown as the mean of three measurements.
A microtiter plate was coated overnight with Human Anti-Dupilumab Antibody, clone AbD47091ad (TZA014) at a concentration of 1 µg/ml. After washing and blocking with PBST + 5% BSA, 10% human serum was added spiked with increasing concentrations of dupilumab. Detection was performed using Human Anti-Dupilumab Antibody, clone AbD47092ad (TZA015) coupled to an HRP-conjugated BiSpyCatcher2 at a concentration of 0.5 µg/ml in HISPEC Assay Diluent (BUF049A) followed by QuantaBlu Fluorogenic Peroxidase Substrate. HRP conjugation of the antibody used in this assay was performed using a LYNX Rapid HRP Antibody Conjugation Kit (LNK002P). Data are shown as the mean of three measurements.
A microtiter plate was coated overnight with recombinant human IL-4Ra at a concentration of 1 µg/ml. After washing and blocking with PBST + 5% BSA, a pre-incubated mixture of dupilumab (0.15 µg/ml) plus increasing concentrations of Human Anti-Dupilumab Antibody, clone AbD47092ad (TZA015) or clone AbD48333ad (TZA016), both in the monovalent Fab format, were added. Free dupilumab, still capable of binding to the human IL-4Ra coated plate, was detected using HRP conjugated Mouse anti Human Fc specific Antibody (MCA647P) followed by QuantaBlu Fluorogenic Peroxidase Substrate. Data are shown as the mean of three measurements.
Human anti Dupilumab
- Product Type
- Monoclonal Antibody
- Clone
- AbD47092
- Isotype
- Fab antibody
- Specificity
- Dupilumab
Antibody Quality and Performance Guarantee
| Human Anti-Dupilumab Antibody, clone AbD47092 is a paratope specific, inhibitory anti-idiotypic antibody (Type 1) that specifically recognizes the free human monoclonal antibody drug dupilumab. TZA015 neither recognizes free IL-4Ra nor dupilumab in complex with IL-4Ra. Consequently, this antibody can be used to measure free dupilumab levels in serum from patients. This TrailBlazer Antibody is available in two different formats, monovalent Fab unconjugated (TZA015) and bivalent Fab conjugated to HRP (TZA015P). The monovalent recombinant Fab antibody has a SpyTag incorporated, which is used to create the bivalent format by coupling two SpyTagged Fab antibodies to an HRP conjugated BiSpyCatcher2 (TZC002P). Either format can be used to develop a pharmacokinetic (PK) bridging ELISA to measure free dupilumab captured via immobilized IL-4Ra. TZA015 can also be converted by the user into alternative antibody formats using any of the SpyCatchers available in our catalog. View a summary of all SpyCatcher products Clone AbD47092 is also available in full length IgG1 format under product code HCA384 Dupilumab (Dupixent) is a human IgG4/kappa antibody inhibiting both IL‐4 and IL-13 receptors, thereby blocking these receptor signaling pathways. Dupilumab inhibits the signaling of interleukins (IL) that induce inflammatory and immunological reactions in several atopic or allergic conditions, such as eczema, allergic reaction, and rhinosinusitis. View a summary of all anti-dupilumab antibodies |
- Product Form
- A monovalent human recombinant Fab (lambda light chain) selected from the HuCAL® phage display library, expressed in a proprietary E. coli. strain. The antibody is tagged with a DYKDDDDK tag, a SpyTag version 2 (VPTIVMVDAYKRYK) and a His6-tag (HHHHHH) at the C-terminus of the antibody heavy chain. This antibody is supplied as a liquid.
- Preparation
- Metal chelate affinity chromatography
- Source
- E.coli
- Buffer Solution
- Phosphate buffered saline
- Preservative Stabilisers
- 0.0095% MIT
- Immunogen
- Dupilumab
- Affinity
- The monovalent intrinsic affinity of AbD47092ad was measured as KD = 0.3 nM by real time, label free molecular interaction analysis on immobilized dupilumab.
- Approx. Protein Concentrations
- Antibody concentration 0.5 mg/ml
- Regulatory
- For research purposes only
- Guarantee
- 12 months from date of despatch
- Acknowledgements
- This product and/or its use is covered by claims of U.S. patents, and/or pending U.S. and non-U.S. patent applications owned by or under license to Bio-Rad Laboratories, Inc. See bio-rad.com/en-us/trademarks for details.
His-tag is a registered trademark of EMD Biosciences.
Dupixent is a trademark of Regeneron Pharmaceuticals, Sanofi-Aventis
This product is shipped at ambient temperature. It is recommended to aliquot and store at -20°C on receipt. When thawed, aliquot the sample as needed. Keep aliquots at 2-8°C for short term use (up to 4 weeks) and store the remaining aliquots at -20°C.
Avoid repeated freezing and thawing as this may denature the antibody. Storage in frost-free freezers is not recommended.
Avoid repeated freezing and thawing as this may denature the antibody. Storage in frost-free freezers is not recommended.
This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visit the antibody protocols page.
| Application Name | Verified | Min Dilution | Max Dilution |
|---|---|---|---|
| ELISA |  |
Where this product has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the product for use in their own system using appropriate negative/positive controls.
- Technical Advice
- Recommended protocols for coupling a Fab antibody with a SpyTag to a SpyCatcher can be found at SpyTag and SpyCatcher Products, and further information about HuCAL recombinant antibody technology can be found in the HuCAL Antibodies Technical Manual
- ELISA
- Clone AbD47092ad can be used as the capture antibody for dupilumab in a bridging ELISA together with AbD47092ad (TZA015) coupled to an HRP-conjugated BiSpyCatcher2 as the detection reagent
Protocol: PK bridging ELISA
Also this antibody can be coupled with SpyCatcher adaptors for use in combination with clone AbD47091ad (TZA014) as capture reagent. Note that both TZA014 (capture) and TZA015 (detection) contain the same peptide tags, therefore using anti-tag antibodies for detecting TZA015 is not possible.
| Description | Product Code | Applications | Pack Size | List Price | Your Price | Quantity | |
|---|---|---|---|---|---|---|---|
| SpyTag3 Peptide | BLP086 | IY | 1 mg |
|
Log in | ||
| List Price | Your Price | ||||||
|
|
Log in | ||||||
| Description | SpyTag3 Peptide | ||||||
| Hispec Assay Diluent | BUF049A | E IY | 50 ml | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | Hispec Assay Diluent | ||||||
| Human anti Dupilumab | HCA383 | E | 0.1 mg |
|
Log in | ||
| List Price | Your Price | ||||||
|
|
Log in | ||||||
| Description | Human anti Dupilumab | ||||||
| Human anti Dupilumab | HCA384 | E | 0.1 mg |
|
Log in | ||
| List Price | Your Price | ||||||
|
|
Log in | ||||||
| Description | Human anti Dupilumab | ||||||
| Human anti Dupilumab | TZA014 | E | 0.1 mg | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | Human anti Dupilumab | ||||||
| Human anti Dupilumab:HRP | TZA015P | E | 0.1 mg | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | Human anti Dupilumab:HRP | ||||||
| Human anti Dupilumab | TZA016 | E | 0.1 mg | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | Human anti Dupilumab | ||||||
| Human anti Dupilumab | TZA017 | E | 0.1 mg | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | Human anti Dupilumab | ||||||
| Human anti Dupilumab:HRP | TZA017P | E | 0.1 mg | Log in | |||
| List Price | Your Price | ||||||
| Log in | |||||||
| Description | Human anti Dupilumab:HRP | ||||||
- Synonyms
- Dupixent
- Licensed Use
- For in vitro research purposes and for commercial applications for the provision of in vitro testing services to support preclinical and clinical drug development. Any re-sale in any form or any other commercial application needs a written agreement with Bio-Rad.
TZA015
164127
If you cannot find the batch/lot you are looking for please contact our technical support team for assistance.
View more products with Dupilumab specificity
Please Note: All Products are "FOR RESEARCH PURPOSES ONLY"
Always be the first to know.
When we launch new products and resources to help you achieve more in the lab.
Yes, sign me up