Poly Caspase

//www.bio-rad-antibodies.com/poly-caspase-antibody-kit-ict916.html?RenderPageSpecific=1
Poly Caspase gallery image 1

Staining of staurosporine-induced Jurkat cells using the SR FLICA poly caspase kit

Enlarge
  • Poly Caspase thumbnail image 1
  • SR FLICA™ Poly Caspase Kit
  • SR FLICA™ Poly Caspase Kit
(Rated 0.0 out of 5 based on 0 customer reviews)
  • Product Type
    Kits
1 Formats Available
    Product CodeApplicationsDatasheetMSDSPack SizeList PriceQuantity
    ICT917F, IFdatasheet pdfdatasheet pdf datasheet pdf datasheet pdf datasheet pdf100 Tests
    ICT917
    ICT916F, IFdatasheet pdfdatasheet pdf datasheet pdf datasheet pdf datasheet pdf25 Tests
    ICT916
    Summary
    Secondary Antibodies
    Negative Isotype Controls
    Useful Reagents
    Positive Controls
    Histology Controls
    More Images
    References
    Reviews
    -
    • The SR FLICA Poly Caspase kit uses a quick and easy method to analyze active caspases in apoptotic cells.
      This FLICA reagent binds the following activated caspases: Caspase 1, Caspase 3, Caspase 4, Caspase 5, Caspase 6, Caspase 7, Caspase 8 and Caspase 9. It can also be used as a generic probe for the detection of most caspases.
    • Intended Use
    • Product Form
    • Reconstitution
    • Preparation
    • Preservative Stabilisers
    • Purity
    • Approx. Protein Concentrations
    • Reagents In The Kit
      Pack Size: 25 Tests1 vial of SR-VAD-FMK FLICA Reagent - lyophilized
      10X Wash Buffer, 15 mL
      Fixative, 6 mL
      Hoechst Stain, 1 mL
      Pack Size: 100 Tests4 vials of SR-VAD-FMK FLICA Reagent - lyophilized
      10X Wash Buffer, 60 mL
      Fixative, 6 mL
      Hoechst Stain, 1 mL
      Pack Size: 25 Tests1 vial of SR-VAD-FMK FLICA Reagent - lyophilized
      10X Wash Buffer, 15 mL
      Fixative, 6 mL
      Hoechst Stain, 1 mL
      Pack Size: 100 Tests4 vials of SR-VAD-FMK FLICA Reagent - lyophilized
      10X Wash Buffer, 60 mL
      Fixative, 6 mL
      Hoechst Stain, 1 mL
    • Preparing The Antibody
    • Test Principle
      Caspase FLICA kits measure apoptosis by detecting active caspases in whole, living cells. These kits do not work by using antibodies or as an ELISA. Instead, their methodology is based on a unique cell-permeable and non-cytotoxic reagent called the Fluorochrome Inhibitor of Caspases (FLICA). The FLICA reagent contains a caspase inhibitor sequence linked to a red (Sulforhodamine, SR) fluorescent probe.

      The Caspase FLICA Kits are suitable for cells in suspension, adherent cells, thin tissue sections (but not fixed or paraffin-embedded cells) from many species including mammalian, insect and yeast. Different cell types, e.g. HeLa, primary neurons, macrophages and lymphocytes have also been successfully studied with these kits.

      This kit can be used with a fluorescence microscope or a fluorescence plate reader using black microtitre plates.
      Caspase FLICA kits measure apoptosis by detecting active caspases in whole, living cells. These kits do not work by using antibodies or as an ELISA. Instead, their methodology is based on a unique cell-permeable and non-cytotoxic reagent called the Fluorochrome Inhibitor of Caspases (FLICA). The FLICA reagent contains a caspase inhibitor sequence linked to a red (Sulforhodamine, SR) fluorescent probe.

      The Caspase FLICA Kits are suitable for cells in suspension, adherent cells, thin tissue sections (but not fixed or paraffin-embedded cells) from many species including mammalian, insect and yeast. Different cell types, e.g. HeLa, primary neurons, macrophages and lymphocytes have also been successfully studied with these kits.

      This kit can be used with a fluorescence microscope or a fluorescence plate reader using black microtitre plates.
    • Buffer Solution
    • Storage
      Store the unopened kit (and each unopened component) at +4oC until the expiration date.
      Protect the FLICA reagent from light at all times.

      Once reconstituted, the 150X FLICA stock should be stored at -20°C protected from light.
      Store the unopened kit (and each unopened component) at +4oC until the expiration date.
      Protect the FLICA reagent from light at all times.

      Once reconstituted, the 150X FLICA stock should be stored at -20°C protected from light.
    • Shelf Life
      Please see label for expiry date.
      Please see label for expiry date.
    • Acknowledgements
      FLICA is a trademark of Immunochemistry Technologies, LLC.
      FLICA is a trademark of Immunochemistry Technologies, LLC.
    • Regulatory
      For research purposes only
    • This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visit the antibody protocols page.

    • Application NameYesNoMin DilutionMax Dilution
      Flow Cytometry
      Immunofluorescence
    • Application NameYesNoMin DilutionMax Dilution
      Flow Cytometry
      Immunofluorescence

    • Where this product has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the product for use in their own system using appropriate negative/positive controls.

    • Technical Advice
    • Technical Advice
    • Recommended Protocol
    • Recommended Protocol
    • ELISA
    • ELISA
    • Immunohistology
    • Immunohistology
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Immunofluorescence
    • Immunofluorescence
    • Western Blotting
    • Western Blotting
    • Instructions For Use
      Instructions for use can be found at www.bio-rad-antibodies.com/uploads/IFU/ICT916.pdf
    • Instructions For Use
      Instructions for use can be found at www.bio-rad-antibodies.com/uploads/IFU/ICT917.pdf

    Additional Poly Caspase Formats

    Formats Applications Sizes available
    Poly Caspase : Sulforhodamine (Red Fluorescence) F, IF 100 Tests | 25 Tests
    • Copyright © 2016 Bio-Rad

    Recommended Secondary Antibody

      Recommended Negative Isotype Control

        Useful Reagents

          DescriptionProduct CodePack SizeApplicationsList PriceQuantity
          FAM FLICA™ Caspase-3/7 KitICT09325 TestsF, IF
          ICT093
          FAM FLICA™ Caspase-6 KitICT09525 TestsF, IF
          ICT095
          FAM FLICA™ Caspase-1 KitICT09725 TestsF, IF
          ICT097
          FAM FLICA™ Caspase-8 KitICT09925 TestsF, IF
          ICT099
          FAM FLICA™ Caspase-9 KitICT91225 TestsF, IF
          ICT912
          FAM FLICA™ Caspase-2 KitICT91825 TestsF, IF
          ICT918
          SR FLICA™ Poly Caspase KitICT917100 TestsF, IF
          ICT917
          DescriptionProduct CodePack SizeApplicationsList PriceQuantity
          FAM FLICA™ Caspase-3/7 KitICT094100 TestsF, IF
          ICT094
          FAM FLICA™ Caspase-6 KitICT096100 TestsF, IF
          ICT096
          FAM FLICA™ Caspase-1 KitICT098100 TestsF, IF
          ICT098
          FAM FLICA™ Caspase-8 KitICT910100 TestsF, IF
          ICT910
          FAM FLICA™ Caspase-9 KitICT913100 TestsF, IF
          ICT913
          FAM FLICA™ Caspase-2 KitICT919100 TestsF, IF
          ICT919
          FAM FLICA™ Caspase-10 KitICT923100 TestsF, IF
          ICT923

          Recommended Positive Controls

            Histology Controls

              References

              Write your review

              You may also be interested in...