PerCP-Cy5.5 Conjugation Kit

//www.bio-rad-antibodies.com/percp-cy5-5-conjugation-kit-lnk141percpcy5-5.html?RenderPageSpecific=1
PerCP-Cy5.5 Conjugation Kit gallery image 1

Purchased this product? Why not be the first to submit a review and upload an image?

Enlarge
  • PerCP-Cy5.5 Conjugation Kit thumbnail image 1
  • LYNX Rapid PerCP-Cy5.5 Antibody Conjugation Kit
  • LYNX Rapid PerCP-Cy5.5 Antibody Conjugation Kit
  • LYNX Rapid PerCP-Cy5.5 Antibody Conjugation Kit
  • LYNX Rapid PerCP-Cy5.5 Antibody Conjugation Kit
(Rated 0.0 out of 5 based on 0 customer reviews)
  • Product Type
    Conjugation Kit
1 Formats Available
    Product CodeApplicationsDatasheetMSDSPack SizeList PriceQuantity
    LNK141PERCPCY5.5CJdatasheet pdfdatasheet pdf datasheet pdf datasheet pdf1 Conjugation For 100µg Antibody
    LNK141PERCPCY5.5
    LNK143PERCPCY5.5CJdatasheet pdfdatasheet pdf datasheet pdf datasheet pdf1 Conjugation For 1mg Antibody
    LNK143PERCPCY5.5
    LNK144PERCPCY5.5CJdatasheet pdfdatasheet pdf datasheet pdf datasheet pdf3 Conjugations For 10µg Antibody
    LNK144PERCPCY5.5
    LNK142PERCPCY5.5CJdatasheet pdfdatasheet pdf datasheet pdf datasheet pdf3 Conjugations For 100µg Antibody
    LNK142PERCPCY5.5
    Summary
    Secondary Antibodies
    Negative Isotype Controls
    Useful Reagents
    Positive Controls
    Histology Controls
    More Images
    References
    Reviews
    -
    • LYNX Rapid PerCP-Cy5.5 Antibody Conjugation Kit® enables the rapid conjugation of a pre-prepared lyophilized mixture containing Peridinin Chlorophyll protein (PerCP)-Cy5.5 label to an antibody or protein. Activation of proprietary reagents within the antibody-label solution results in directional covalent bonding of PerCP-Cy5.5 to the antibody.

      The LYNX Rapid Conjugation kits® can be used to label small quantities of antibody/protein at near neutral pH, allowing a high conjugation efficiency with 100% antibody recovery.
    • Intended Use
    • Product Form
    • Reconstitution
    • Preparation
    • Preservative Stabilisers
    • Purity
    • Approx. Protein Concentrations
    • Reagents In The Kit
      Pack Size: 1 Conjugation For 100µg Antibody1 Vial of 100ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 3 Conjugations For 100µg Antibody3 Vials of 100ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 1 Conjugation For 1mg Antibody1 Vials of 1mg LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 3 Conjugations For 10µg Antibody3 Vials of 10ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 1 Conjugation For 100µg Antibody1 Vial of 100ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 3 Conjugations For 100µg Antibody3 Vials of 100ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 1 Conjugation For 1mg Antibody1 Vials of 1mg LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 3 Conjugations For 10µg Antibody3 Vials of 10ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 1 Conjugation For 100µg Antibody1 Vial of 100ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 3 Conjugations For 100µg Antibody3 Vials of 100ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 1 Conjugation For 1mg Antibody1 Vials of 1mg LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 3 Conjugations For 10µg Antibody3 Vials of 10ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 1 Conjugation For 100µg Antibody1 Vial of 100ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 3 Conjugations For 100µg Antibody3 Vials of 100ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 1 Conjugation For 1mg Antibody1 Vials of 1mg LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
      Pack Size: 3 Conjugations For 10µg Antibody3 Vials of 10ug LYNX lyophilized PerCP-Cy5.5 mix
      1 Vial LYNX Modifier reagent
      1 Vial LYNX Quencher reagent
    • Preparing The Antibody
      Pack Size: 1 Conjugation For 100µg Antibody, 3 Conjugations For 100µg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 100ug antibody to every 100ug PerCP-Cy5.5. For optimal results the antibody volume should be 25-100ul, at a concentration range of 1-4mg/ml.
      Pack Size: 1 Conjugation For 1mg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 100ug antibody to every 100ug PerCP-Cy5.5. For optimal results the antibody volume should be 250-1000ul, at a concentration range of 1-4mg/ml.
      Pack Size: 3 Conjugations For 10µg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 10ug antibody to every 10ug PerCP-Cy5.5. For optimal results the antibody volume should be 4-10ul, at a concentration range of 1-4mg/ml.
      Pack Size: 1 Conjugation For 100µg Antibody, 3 Conjugations For 100µg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 100ug antibody to every 100ug PerCP-Cy5.5. For optimal results the antibody volume should be 25-100ul, at a concentration range of 1-4mg/ml.
      Pack Size: 1 Conjugation For 1mg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 100ug antibody to every 100ug PerCP-Cy5.5. For optimal results the antibody volume should be 250-1000ul, at a concentration range of 1-4mg/ml.
      Pack Size: 3 Conjugations For 10µg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 10ug antibody to every 10ug PerCP-Cy5.5. For optimal results the antibody volume should be 4-10ul, at a concentration range of 1-4mg/ml.
      Pack Size: 1 Conjugation For 100µg Antibody, 3 Conjugations For 100µg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 100ug antibody to every 100ug PerCP-Cy5.5. For optimal results the antibody volume should be 25-100ul, at a concentration range of 1-4mg/ml.
      Pack Size: 1 Conjugation For 1mg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 100ug antibody to every 100ug PerCP-Cy5.5. For optimal results the antibody volume should be 250-1000ul, at a concentration range of 1-4mg/ml.
      Pack Size: 3 Conjugations For 10µg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 10ug antibody to every 10ug PerCP-Cy5.5. For optimal results the antibody volume should be 4-10ul, at a concentration range of 1-4mg/ml.
      Pack Size: 1 Conjugation For 100µg Antibody, 3 Conjugations For 100µg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 100ug antibody to every 100ug PerCP-Cy5.5. For optimal results the antibody volume should be 25-100ul, at a concentration range of 1-4mg/ml.
      Pack Size: 1 Conjugation For 1mg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 100ug antibody to every 100ug PerCP-Cy5.5. For optimal results the antibody volume should be 250-1000ul, at a concentration range of 1-4mg/ml.
      Pack Size: 3 Conjugations For 10µg AntibodyThe following buffer solutions are recommended:for preparing the antibody:

      10-50mM amine-free buffer (e.g HEPES, MES, MOPS and phosphate) pH range 6.5-8.5, although moderate concentrations of Tris buffer (<20mM) may be tolerated.

      Do not use buffers containing nucleophilic components e.g primary amines and thiols since they may react with LYNX chemicals. Azide (0.02-0.1%), EDTA and common non-buffering salts and sugars have little or no effect on conjugation efficiency.

      The molar ratio of antibody: PerCP-Cy5.5 should be 1:1, i.e. 10ug antibody to every 10ug PerCP-Cy5.5. For optimal results the antibody volume should be 4-10ul, at a concentration range of 1-4mg/ml.
    • Test Principle
    • Buffer Solution
    • Storage
      Store kit at -20oC only.
      Newly-conjugated antibody can be stored at 4oC. For long term storage however, the addition of a preservative is recommended.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Avoid repeated freezing and thawing.
      Store kit at -20oC only.
      Newly-conjugated antibody can be stored at 4oC. For long term storage however, the addition of a preservative is recommended.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Avoid repeated freezing and thawing.
      Store kit at -20oC only.
      Newly-conjugated antibody can be stored at 4oC. For long term storage however, the addition of a preservative is recommended.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Avoid repeated freezing and thawing.
      Store kit at -20oC only.
      Newly-conjugated antibody can be stored at 4oC. For long term storage however, the addition of a preservative is recommended.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Avoid repeated freezing and thawing.
    • Shelf Life
      12 months from date of despatch.
      12 months from date of despatch.
      12 months from date of despatch.
      12 months from date of despatch.
    • Acknowledgements
      This product or portions thereof is manufactured under license from Carnegie Mellon University under U.S. Patent Number 5,268,486 and related patents. Cy and CyDye are trademarks of GE Healthcare Limited.
      This product or portions thereof is manufactured under license from Carnegie Mellon University under U.S. Patent Number 5,268,486 and related patents. Cy and CyDye are trademarks of GE Healthcare Limited.
      This product or portions thereof is manufactured under license from Carnegie Mellon University under U.S. Patent Number 5,268,486 and related patents. Cy and CyDye are trademarks of GE Healthcare Limited.
      This product or portions thereof is manufactured under license from Carnegie Mellon University under U.S. Patent Number 5,268,486 and related patents. Cy and CyDye are trademarks of GE Healthcare Limited.
    • Licensed Use
      These products and the methodology of conjugation are patent protected under United Kingdom patent number 2446088 and associated international patent applications. The purchase of this product conveys to the buyer the limited, non exclusive non-transferable right (without the right to resell repackage or further sublicense) under these patents to use the product to make conjugates for research and development purposes only. The purchaser cannot sell or otherwise transfer this product, or its components, or materials or data made using this product, or its components to a third party. Further information on purchasing licenses for diagnostic and other uses may be obtained by contacting Bio-Rad, at. Endeavour House, Langford Business Park, Langford Lane, Kidlington, Oxon. OX5 1GE UNITED KINGDOM. Tel: +44 1865 852 700. E-mail: antibodies@bio-rad.com
    • Regulatory
      For research purposes only
    • This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visit the antibody protocols page.

    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation


    • We recommend that for each conjugation the user determines the best antibody:conjugate ratio.
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • ELISA
    • ELISA
    • ELISA
    • ELISA
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Instructions For Use
      1.To the antibody sample add 1ul of the Modifier reagent for every 10ul of antibody and mix gently.

      2.Pipette the mixed antibody-modifier sample directly onto the LYNX lyophilized mix and gently pipette up and down twice to resuspend.

      3.Replace cap onto vial and incubate in the dark at room temperature (20-25oC) for 3 hours, or overnight if preferred.

      4.After incubation, add 1ul of Quencher reagent for every 10ul of antibody used. Leave to stand for 30 minutes before use.
    • Instructions For Use
      1.To the antibody sample add 1ul of the Modifier reagent for every 10ul of antibody and mix gently.

      2.Pipette the mixed antibody-modifier sample directly onto the LYNX lyophilized mix and gently pipette up and down twice to resuspend.

      3.Replace cap onto vial and incubate in the dark at room temperature (20-25oC) for 3 hours, or overnight if preferred.

      4.After incubation, add 1ul of Quencher reagent for every 10ul of antibody used. Leave to stand for 30 minutes before use.
    • Instructions For Use
      1.To the antibody sample add 1ul of the Modifier reagent for every 10ul of antibody and mix gently.

      2.Pipette the mixed antibody-modifier sample directly onto the LYNX lyophilized mix and gently pipette up and down twice to resuspend.

      3.Replace cap onto vial and incubate in the dark at room temperature (20-25oC) for 3 hours, or overnight if preferred.

      4.After incubation, add 1ul of Quencher reagent for every 10ul of antibody used. Leave to stand for 30 minutes before use.
    • Instructions For Use
      1.To the antibody sample add 1ul of the Modifier reagent for every 10ul of antibody and mix gently.

      2.Pipette the mixed antibody-modifier sample directly onto the LYNX lyophilized mix and gently pipette up and down twice to resuspend.

      3.Replace cap onto vial and incubate in the dark at room temperature (20-25oC) for 3 hours, or overnight if preferred.

      4.After incubation, add 1ul of Quencher reagent for every 10ul of antibody used. Leave to stand for 30 minutes before use.

    Additional PerCP-Cy5.5 Conjugation Kit Formats

    Formats Applications Sizes available
    PerCP-Cy5.5 Conjugation Kit : Kit CJ 1 Conjugation For 1mg Antibody | 3 Conjugations For 10µg Antibody | 1 Conjugation For 100µg Antibody | 3 Conjugations For 100µg Antibody
    • Copyright © 2016 Bio-Rad Antibodies (formerly AbD Serotec)

    Recommended Secondary Antibody

      Recommended Negative Isotype Control

        Useful Reagents

          Recommended Positive Controls

            Histology Controls

              Write your review

              You may also be interested in...