TMB Signal+

//www.bio-rad-antibodies.com/tmb-signal-accessory-reagent-buf054a.html
TMB Signal+ gallery image 1

Purchased this product? Why not be the first to submit a review and upload an image?

Enlarge
  • TMB Signal+ thumbnail image 1
  • TMB Signal+
  • TMB Signal+
(Rated 0.0 out of 5 based on 0 customer reviews)
  • Product Type
    Accessory Reagent
1 Formats Available
    Product CodeApplicationsDatasheetMSDSPack SizeList PriceQuantity
    BUF054AEdatasheet pdfdatasheet pdf100 ml
    BUF054A
    BUF054BEdatasheet pdfdatasheet pdf500 ml
    BUF054B
    Summary
    Secondary Antibodies
    Negative Isotype Controls
    Useful Reagents
    Positive Controls
    Histology Controls
    More Images
    References
    Reviews
    -
    • Intended Use
      Pack Size: 100 mlBUF054A is a high performance TMB (3,3´, 5, 5´- tetramethylbenzidine) solution, recommended for use in ELISA detection systems as a substrate for horseradish peroxidase (HRP).

      BUF054A contains TMB, substrate buffer and hydrogen peroxide in a safe, ready to use solution. TMB SIGNAL+ has been optimised to enable increased sensitivity whilst maintaining increased stability. BUF054A provides minimal background and rapid development.

      BUF054A produces a deep blue colour during the enzymatic degradation of H2O2 by horseradish peroxidase. For kinetic assays the absorbance is read at 655nm (blue). However, for endpoint assays the reaction may be stopped with 0.2M sulphuric acid, resulting in a yellow colour read at 450nm.
      Pack Size: 500 mlBUF054B is a high performance TMB (3,3´, 5, 5´- tetramethylbenzidine) solution, recommended for use in ELISA detection systems as a substrate for horseradish peroxidase (HRP).

      BUF054B contains TMB, substrate buffer and hydrogen peroxide in a safe, ready to use solution. TMB SIGNAL+ has been optimised to enable increased sensitivity whilst maintaining increased stability. BUF054B provides minimal background and rapid development.

      BUF054B produces a deep blue colour during the enzymatic degradation of H2O2 by horseradish peroxidase. For kinetic assays the absorbance is read at 655nm (blue). However, for endpoint assays the reaction may be stopped with 0.2M sulphuric acid, resulting in a yellow colour read at 450nm.
      Pack Size: 100 mlBUF054A is a high performance TMB (3,3´, 5, 5´- tetramethylbenzidine) solution, recommended for use in ELISA detection systems as a substrate for horseradish peroxidase (HRP).

      BUF054A contains TMB, substrate buffer and hydrogen peroxide in a safe, ready to use solution. TMB SIGNAL+ has been optimised to enable increased sensitivity whilst maintaining increased stability. BUF054A provides minimal background and rapid development.

      BUF054A produces a deep blue colour during the enzymatic degradation of H2O2 by horseradish peroxidase. For kinetic assays the absorbance is read at 655nm (blue). However, for endpoint assays the reaction may be stopped with 0.2M sulphuric acid, resulting in a yellow colour read at 450nm.
      Pack Size: 500 mlBUF054B is a high performance TMB (3,3´, 5, 5´- tetramethylbenzidine) solution, recommended for use in ELISA detection systems as a substrate for horseradish peroxidase (HRP).

      BUF054B contains TMB, substrate buffer and hydrogen peroxide in a safe, ready to use solution. TMB SIGNAL+ has been optimised to enable increased sensitivity whilst maintaining increased stability. BUF054B provides minimal background and rapid development.

      BUF054B produces a deep blue colour during the enzymatic degradation of H2O2 by horseradish peroxidase. For kinetic assays the absorbance is read at 655nm (blue). However, for endpoint assays the reaction may be stopped with 0.2M sulphuric acid, resulting in a yellow colour read at 450nm.
    • Product Form
      Ready to use TMB solution - liquid
      Ready to use TMB solution - liquid
    • Reconstitution
    • Preparation
    • Preservative Stabilisers
    • Purity
    • Approx. Protein Concentrations
    • Reagents In The Kit
    • Preparing The Antibody
    • Test Principle
    • Buffer Solution
    • Storage
      Store at +4oC. DO NOT FREEZE.
      This product is photosensitive and should be protected from light.

      Avoid exposure to heat and contamination with metal ions or peroxidase.

      Store in bottles made of High Density Polyethylene (HDPE).
      Store at +4oC. DO NOT FREEZE.
      This product is photosensitive and should be protected from light.

      Avoid exposure to heat and contamination with metal ions or peroxidase.

      Store in bottles made of High Density Polyethylene (HDPE).
    • Shelf Life
      Please see label for expiry date
      Please see label for expiry date
    • Acknowledgements
    • Regulatory
      For research purposes only
    • This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visit the antibody protocols page.

    • Application NameYesNoMin DilutionMax Dilution
      ELISANeat
    • Application NameYesNoMin DilutionMax Dilution
      ELISANeat

    • Where this product has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the product for use in their own system using appropriate negative/positive controls.
    • Technical Advice
    • Technical Advice
    • Recommended Protocol
    • Recommended Protocol
    • ELISA
    • ELISA
    • Immunohistology
    • Immunohistology
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Immunofluorescence
    • Immunofluorescence
    • Western Blotting
    • Western Blotting
    • Instructions For Use
      1. Pour the desired amount of BUF054A into a sealable container and allow it to reach room temperature in the dark. Note that 0.1ml will be required per well.

      2. Add 0.1ml of BUF054A per microtiter well.

      3. Allow development of BUF054A. Development time is typically 5-30 minutes. For best results, the plate should be kept in the dark during incubation. i.e. wrapped in tinfoil.

      4. For kinetic assays, read absorbance at 655nm (blue). For endpoint assays, add an equal volume of 0.2M sulphuric acid and read the absorbance at 450nm (yellow). This endpoint solution is stable for up to one hour.

      5. If reduced intensity is required, it is recommended that the development time is reduced or the antibody/conjugate is diluted further. (Dilution of BUF054A is not recommended).
    • Instructions For Use
      1. Pour the desired amount of BUF054B into a sealable container and allow it to reach room temperature in the dark. Note that 0.1ml will be required per well.

      2. Add 0.1ml of BUF054B per microtiter well.

      3. Allow development of BUF054B. Development time is typically 5-30 minutes. For best results, the plate should be kept in the dark during incubation. i.e. wrapped in tinfoil.

      4. For kinetic assays, read absorbance at 655nm (blue). For endpoint assays, add an equal volume of 0.2M sulphuric acid and read the absorbance at 450nm (yellow). This endpoint solution is stable for up to one hour.

      5. If reduced intensity is required, it is recommended that the development time is reduced or the antibody/conjugate is diluted further. (Dilution of BUF054B is not recommended).

    Additional TMB Signal+ Formats

    Formats Applications Sizes available
    TMB Signal+ : Ready To Use E 500 ml | 100 ml
    • Copyright © 2016 Bio-Rad Antibodies (formerly AbD Serotec)

    Recommended Secondary Antibody

      Recommended Negative Isotype Control

        Useful Reagents

          Recommended Positive Controls

            Histology Controls

              Write your review

              You may also be interested in...

              You May Also Be Interested In...