TMB Core

TMB Core

Product Type
Accessory Reagent
Specificity
TMB Core

Product Code Applications Pack Size List Price Your Price Qty
BUF056A
Datasheet Datasheet Datasheet
SDS Safety Datasheet SDS
E 100 ml
List Price Your Price
BUF056B
Datasheet Datasheet Datasheet
SDS Safety Datasheet SDS
E 500 ml
List Price Your Price
Search for Batch Specific Datasheets

Intended Use
BUF056A is a high performance TMB (3,3´, 5, 5´- tetramethylbenzidine) solution, recommended for use in ELISA detection systems as a substrate for horseradish peroxidase (HRP).

TMB CORE contains TMB, substrate buffer and hydrogen peroxide in a safe, ready to use solution.

BUF056A produces a deep blue colour during the enzymatic degradation of H2O2 by horseradish peroxidase. For kinetic assays the absorbance is read at 655nm (blue). However, for endpoint assays the reaction may be stopped with 0.2M sulphuric acid, resulting in a yellow colour read at 450nm.
Product Form
Ready to use TMB solution - liquid
Regulatory
For research purposes only
Guarantee
Guaranteed until date of expiry. Please see product label.

Store at +4oC. DO NOT FREEZE.
This product is photosensitive and should be protected from light.

Avoid exposure to heat and contamination with metal ions or peroxidase.

Store in bottles made of High Density Polyethylene (HDPE).

This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visit the antibody protocols page.
Application Name Verified Min Dilution Max Dilution
ELISA Neat
Where this product has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the product for use in their own system using appropriate negative/positive controls.
Instructions For Use
1. Pour the desired amount of BUF056A into a sealable container and allow it to reach room temperature in the dark. Note that 0.1ml will be required per well.

2. Add 0.1ml of BUF056A per microtiter well.

3. Allow development of BUF056A. Development time is typically 5-30 minutes. For best results, the plate should be kept in the dark during incubation. i.e. wrapped in tinfoil.

4. For kinetic assays, read absorbance at 655nm (blue). For endpoint assays, add an equal volume of 0.2M sulphuric acid and read the absorbance at 450nm (yellow). This endpoint solution is stable for up to one hour.

5. If reduced intensity is required, it is recommended that the development time is reduced or the antibody/conjugate is diluted further. (Dilution of BUF056A is not recommended).
1. Pour the desired amount of BUF056B into a sealable container and allow it to reach room temperature in the dark. Note that 0.1ml will be required per well.

2. Add 0.1ml of BUF056B per microtiter well.

3. Allow development of BUF056B. Development time is typically 5-30 minutes. For best results, the plate should be kept in the dark during incubation. i.e. wrapped in tinfoil.

4. For kinetic assays, read absorbance at 655nm (blue). For endpoint assays, add an equal volume of 0.2M sulphuric acid and read the absorbance at 450nm (yellow). This endpoint solution is stable for up to one hour.

5. If reduced intensity is required, it is recommended that the development time is reduced or the antibody/conjugate is diluted further. (Dilution of BUF056B is not recommended).
View more products with TMB specificity

Please Note: All Products are "FOR RESEARCH PURPOSES ONLY"