94% Preservative base of resin containing: 20% Aqueous Ethanol 80% 0.1M Sodium Chloride
Approx. Protein Concentrations
Reagents In The Kit
48 x Spin Column Plugs containing Endotoxin Binding Resin 48 x Midi Standard Spin Columns (20ml capacity) 48 x 50ml Centrifuge Tubes Plug Insertion Tool Instructions for use
Preparing The Antibody
This kit can be used for samples with endotoxin loads < 30,000 EU. For endotoxin loads < 3,000 EU the Mini Endotoxin Removal kit is recommended. Endotoxin loads up to 1,000,000 EU require the use of a Midi High Capacity Endotoxin Removal kit.
Additional Reagents Required
0.2µm and 1.2µm Syringe Filter Units Low Endotoxin Pre-equilibration Buffer e.g PBS pH7.4
Upon receipt of kit, remove resin plugs box and store this at +4oC. DO NOT FREEZE RESIN PLUGS OR STORE AT ROOM TEMPERATURE. Store remainder of kit at room temperature.
24 months from date of despatch.
For research purposes only
This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visit the antibody protocols page.
Where this product has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures.