- Intended Use
- HISPEC assay diluent works to reduce cross reactivity, non-specific binding and matrix effects in immunoassays such as ELISA, EIA, Western blotting, immuno-PCR, protein arrays, multianalyte immunoassays and immunohistochemistry.
The effect of HISPEC assay diluent is dependent on assay system and the antibodies used.
HISPEC assay diluent is used instead of a sample buffer or antibody dilution buffer within the immunoassay protocol.
HISPEC assay diluent is unsuitable for blocking of surfaces. For blocking of surfaces we recommend one of the blocking solutions within the Bio-Rad range – see “Useful reagents” below.
Examples of use:
ELISA: use as a dilution buffer for the specimen and for the detection antibodies
Western blotting: use as dilution buffer for primary and secondary antibodies
Immunohistochemistry: use as dilution buffer for primary and secondary antibodies
Protein arrays: use as dilution buffer for specimen and for the detection antibodies
- Product Form
- Ready to use assay diluent buffer
- Preservative Stabilisers
- 0.1% Proclin™ 300
- This product is shipped at ambient temperature. It is recommended to aliquot and store at -20°C on receipt. When thawed, aliquot the sample as needed. Keep aliquots at 2-8°C for short term use (up to 4 weeks) and store the remaining aliquots at -20°C.
Avoid repeated freezing and thawing as this may denature the antibody. Storage in frost-free freezers is not recommended.
- Guaranteed until date of expiry. Please see product label.
- Proclin™ 300 is a trademark of The Dow Chemical Company (“Dow”) or an affiliated company of Dow.
- For research purposes only
This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visit the antibody protocols page.
Applications of Hispec Assay Diluent
Where this product has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the product for use in their own system using appropriate negative/positive controls.
- Instructions For Use
- The buffer should be mixed thoroughly immediately before use.
Dilution of the samples:
The standards and samples for ELISA and protein arrays can be diluted with HISPEC assay diluent at 1:2 or higher. Standards and samples should be treated identically.
Dilution of antibodies:
Antibodies can be diluted with HISPEC assay diluent in a user-defined manner, depending on the recommendation of the antibody supplier.
In some cases a reduction in assay signal intensity may be observed when using HISPEC assay diluent. This does not result in a reduction in assay sensitivity due to the accompanying reduction in non-specific binding.
Signal intensity may be increased in some assay systems by use of higher concentrations of antibodies, or by dilution of the HISPEC assay diluent in distilled water (1:2) prior to use. However, these adjustments may also result in some associated increase in non-specific binding.
Copyright © 2021 Bio-Rad Antibodies (formerly AbD Serotec)
Useful Reagents Available
Product Specific References
References for Hispec Assay Diluent
Eriksson, O. et al. (2017) Pancreatic imaging using an antibody fragment targeting the zinc transporter type 8: a direct comparison with radio-iodinated Exendin-4.
Acta Diabetol. Oct 24 [Epub ahead of print].
How to Use the Spectraviewer
Watch the Tool Tutorial Video ▸
Start by selecting the application you are interested in, with the option to select an instrument from the drop down menu or create a customized instrument
Select the fluorophores or fluorescent proteins you want to include in your panel to check compatibility
Select the lasers and filters you wish to include
Select combined or multi-laser view to visualize the spectra