TMB Sensitive

//www.bio-rad-antibodies.com/tmb-sensitive-accessory-reagent-buf066a.html?RenderPageSpecific=1
TMB Sensitive gallery image 1

Purchased this product? Why not be the first to submit a review and upload an image?

Enlarge
  • TMB Sensitive thumbnail image 1
  • TMB Sensitive
  • TMB Sensitive
(Rated 0.0 out of 5 based on 0 customer reviews)
  • Product Type
    Accessory Reagent
1 Formats Available
    Product CodeApplicationsDatasheetMSDSPack SizeList PriceQuantity
    BUF066AEdatasheet pdfdatasheet pdf100 ml
    BUF066A
    BUF066BEdatasheet pdfdatasheet pdf500 ml
    BUF066B
    Summary
    Secondary Antibodies
    Negative Isotype Controls
    Useful Reagents
    Positive Controls
    Histology Controls
    More Images
    References
    Reviews
    -
    • Intended Use
      Pack Size: 500 mlBUF066B is a high performance TMB (3,3´, 5, 5´- tetramethylbenzidine) solution, recommended for use in ELISA as a substrate for horseradish peroxidase (HRP).

      BUF066B contains TMB, substrate buffer and hydrogen peroxide in a safe, ready to use solution. The activity of TMB has been optimised to enable increased sensitivity, minimal background and rapid development.

      BUF066B produces a deep blue colour during the enzymatic degradation of H2O2 by horseradish Peroxidase. The reaction may be stopped with 0.25M sulphuric acid, resulting in a yellow colour read at 450nm.

      BUF066B is more sensitive than other TMB reagents offered by Bio-Rad.
      Pack Size: 100 mlBUF066A is a high performance TMB (3,3´, 5, 5´- tetramethylbenzidine) solution, recommended for use in ELISA as a substrate for horseradish peroxidase (HRP).

      BUF066A contains TMB, substrate buffer and hydrogen peroxide in a safe, ready to use solution. The activity of TMB has been optimised to enable increased sensitivity, minimal background and rapid development.

      BUF066A produces a deep blue colour during the enzymatic degradation of H2O2 by horseradish Peroxidase. The reaction may be stopped with 0.25M Sulphuric acid, resulting in a yellow colour read at 450nm.

      BUF066A is more sensitive than other TMB reagents offered by Bio-Rad.
      Pack Size: 500 mlBUF066B is a high performance TMB (3,3´, 5, 5´- tetramethylbenzidine) solution, recommended for use in ELISA as a substrate for horseradish peroxidase (HRP).

      BUF066B contains TMB, substrate buffer and hydrogen peroxide in a safe, ready to use solution. The activity of TMB has been optimised to enable increased sensitivity, minimal background and rapid development.

      BUF066B produces a deep blue colour during the enzymatic degradation of H2O2 by horseradish Peroxidase. The reaction may be stopped with 0.25M sulphuric acid, resulting in a yellow colour read at 450nm.

      BUF066B is more sensitive than other TMB reagents offered by Bio-Rad.
      Pack Size: 100 mlBUF066A is a high performance TMB (3,3´, 5, 5´- tetramethylbenzidine) solution, recommended for use in ELISA as a substrate for horseradish peroxidase (HRP).

      BUF066A contains TMB, substrate buffer and hydrogen peroxide in a safe, ready to use solution. The activity of TMB has been optimised to enable increased sensitivity, minimal background and rapid development.

      BUF066A produces a deep blue colour during the enzymatic degradation of H2O2 by horseradish Peroxidase. The reaction may be stopped with 0.25M Sulphuric acid, resulting in a yellow colour read at 450nm.

      BUF066A is more sensitive than other TMB reagents offered by Bio-Rad.
    • Product Form
      Ready to use TMB solution - liquid
      Ready to use TMB solution - liquid
    • Reconstitution
    • Preparation
    • Preservative Stabilisers
    • Purity
    • Approx. Protein Concentrations
    • Reagents In The Kit
    • Preparing The Antibody
    • Test Principle
    • Buffer Solution
    • Storage
      Store at +4oC. DO NOT FREEZE.
      This product is photosensitive and should be protected from light.

      Avoid exposure to heat and contamination with metal ions or peroxidase.

      Store in bottles made of High Density Polyethylene (HDPE).
      Store at +4oC. DO NOT FREEZE.
      This product is photosensitive and should be protected from light.

      Avoid exposure to heat and contamination with metal ions or peroxidase.

      Store in bottles made of High Density Polyethylene (HDPE).
    • Shelf Life
      Please see label for expiry date
      48 months from date of despatch.
    • Acknowledgements
    • Regulatory
      For research purposes only
    • This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visit the antibody protocols page.

    • Application NameYesNoMin DilutionMax Dilution
      ELISA
    • Application NameYesNoMin DilutionMax Dilution
      ELISA

    • Where this product has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the product for use in their own system using appropriate negative/positive controls.
    • Technical Advice
    • Technical Advice
    • Recommended Protocol
    • Recommended Protocol
    • ELISA
    • ELISA
    • Immunohistology
    • Immunohistology
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Immunofluorescence
    • Immunofluorescence
    • Western Blotting
    • Western Blotting
    • Instructions For Use
      1. It is recommended that 100ul of BUF066A TMB substrate is used per microtiter well. Pour the desired amount of substrate into a sealed container and allow it to reach room termperature in the dark.

      2. Add 100ul of substrate solution per microtiter well.

      3. Allow development of the substrate solution. Development time is typically 5-15 minutes. For best results, the plate should be kept in the dark during incubation e.g. wrapped in tinfoil.

      4. For kinetic assays, read absorbance at 655nm (blue). For endpoint assays, add an equal volume of 0.25M sulphuric acid and read the absorbance at 450nm (yellow). This endpoint solution is stable for up to one hour.

      N.B. If reduced intensity is required, it is recommended that the development time is reduced or the antibody/conjugate is diluted further. (Dilution of BUF066A is not recommended).
    • Instructions For Use
      1. It is recommended that 100ul of BUF066B TMB substrate is used per microtiter well. Pour the desired amount of substrate into a sealed container and allow it to reach room termperature in the dark.

      2. Add 100ul of substrate solution per microtiter well.

      3. Allow development of the substrate solution. Development time is typically 5-15 minutes. For best results, the plate should be kept in the dark during incubation e.g. wrapped in tinfoil.

      4. For kinetic assays, read absorbance at 655nm (blue). For endpoint assays, add an equal volume of 0.25M sulphuric acid and read the absorbance at 450nm (yellow). This endpoint solution is stable for up to one hour.

      N.B. If reduced intensity is required, it is recommended that the development time is reduced or the antibody/conjugate is diluted further. (Dilution of BUF066B is not recommended).

    Additional TMB Sensitive Formats

    Formats Applications Sizes available
    TMB Sensitive : Ready To Use E 500 ml | 100 ml
    • Copyright © 2016 Bio-Rad Antibodies (formerly AbD Serotec)

    Recommended Secondary Antibody

      Recommended Negative Isotype Control

        Useful Reagents

          Recommended Positive Controls

            Histology Controls

              Write your review

              You may also be interested in...