READILINK™

//www.bio-rad-antibodies.com/readilink-1351001.html?RenderPageSpecific=1
READILINK™ gallery image 1

Efficient labelling of antibodies in two easy steps

Enlarge
  • READILINK™ thumbnail image 1
  • READILINK™ 405/454 Antibody Labeling Kit
  • READILINK™ 594/610 Antibody Labeling Kit
  • READILINK™ 790/811 Antibody Labeling Kit
  • READILINK™ 647/674 Antibody Labeling Kit
  • READILINK™ 405/508 Antibody Labeling Kit
  • READILINK™ 680/701 Antibody Labeling Kit
  • READILINK™ 350/440 Antibody Labeling Kit
  • READILINK™ 750/780 Antibody Labeling Kit
  • READILINK™ 492/516 Antibody Labeling Kit
  • READILINK™ 633/655 Antibody Labeling Kit
  • READILINK™ 555/570 Antibody Labeling Kit
  • READILINK™ 700/713 Antibody Labeling Kit
  • READILINK™ 405/537 Antibody Labeling Kit
(Rated 0.0 out of 5 based on 0 customer reviews)
  • Product Type
    Conjugation Kit
13 Formats Available
    Product CodeApplicationsDatasheetMSDSPack SizeList PriceQuantity
    1351011CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351011
    1351004CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351004
    1351010CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351010
    1351006CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351006
    1351012CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351012
    1351007CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351007
    1351001CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351001
    1351009CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351009
    1351002CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351002
    1351005CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351005
    1351003CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351003
    1351008CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351008
    1351013CJdatasheet pdfdatasheet pdf2 Conjugations For 50 µg Antibody
    1351013
    Summary
    Secondary Antibodies
    Negative Isotype Controls
    Useful Reagents
    Positive Controls
    Histology Controls
    More Images
    References
    Reviews
    -
    • ReadiLink Antibody Labeling Kits offer easy fluorescence conjugations for microscale volumes (50-100 µg). Each ReadiLink Dye is coupled to a reactive moiety (a succinimidyl ester). The reactive dye selectively binds to primary amines of proteins to form a stable carboxamide bond, ensuring no dissociation between fluorophore and antibody. After conjugation and the addition of the quencher buffer, any unbound ReadiLink Dye will bind to the quencher and become nonfluorescent.

      The ReadiLink Antibody Labeling Kit provides all the essential components for performing two conjugation reactions (2 x 50 µg). Each kit can be used to label monoclonal or polyclonal antibodies or other proteins (>10 kDa).
    • Intended Use
    • Product Form
    • Reconstitution
    • Preparation
    • Preservative Stabilisers
    • Purity
    • Approx. Protein Concentrations
    • Reagents In The Kit
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
      2 vials ReadiLink Labeling Dye (powder) (Note: Use one vial to label 50 μg of antibodies)

      1 vial (20 μl) Reaction Buffer

      1 vial (20 μl) Quench Buffer
    • Preparing The Antibody
    • Test Principle
    • Buffer Solution
    • Storage
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
      Store at -20oC only.
      Storage in frost-free freezers is not recommended.
      This product should be stored undiluted.
    • Shelf Life
      Please see label for expiry date.
      Please see label for expiry date.
      Please see label for expiry date.
      Please see label for expiry date.
      Please see label for expiry date.
      Please see label for expiry date.
      Please see label for expiry date.
      Please see label for expiry date.
      Please see label for expiry date.
      Please see label for expiry date.
      Please see label for expiry date.
      Please see label for expiry date.
      Please see label for expiry date.
    • Acknowledgements
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
      ReadiLink™ is a trademark of AAT Bioquest, Inc.
    • Regulatory
      For research purposes only
    • This product has been reported to work in the following applications. This information is derived from testing within our laboratories, peer-reviewed publications or personal communications from the originators. Please refer to references indicated for further information. For general protocol recommendations, please visit the antibody protocols page.

    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation
    • Application NameYesNoMin DilutionMax Dilution
      Conjugation

    • Where this product has not been tested for use in a particular technique this does not necessarily exclude its use in such procedures. Suggested working dilutions are given as a guide only. It is recommended that the user titrates the product for use in their own system using appropriate negative/positive controls.
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Technical Advice
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • Recommended Protocol
    • ELISA
    • ELISA
    • ELISA
    • ELISA
    • ELISA
    • ELISA
    • ELISA
    • ELISA
    • ELISA
    • ELISA
    • ELISA
    • ELISA
    • ELISA
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Immunohistology
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Histology Positive Control Tissue
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Immunofluorescence
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Western Blotting
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.
    • Instructions For Use
      Important: Thaw all kit components prior to use.

      Note: The antibody of interest must be suspended in phosphate buffered saline (PBS), pH 7.2-7.4, or be dialyzed against PBS prior to conjugation to remove free amines or ammonium salts in the solution.

      Note: The optimal antibody conjugation is 1 mg/ml. A conjugation performed at a different conjugation concentration may cause suboptimal labeling.

      1. Suspend the antibody of interest in PBS to create a 1 mg/ml concentration.

      2. Add 5 μl reaction buffer to 50 μl antibody solution from step 1.

      3. Mix well by pipetting up and down a few times.

      4. Add the entire volume (55 μl) to one vial of labeling dye and mix by pipetting.

      5. Incubate for 60 min at room temperature.

      6. Add 5 μl quencher to the reaction mixture.

      7. Incubate for 10 min at room temperature.

      Antibodies are now labeled and ready to use.

    Additional READILINK™ Formats

    Formats Applications Sizes available
    READILINK™ : 492/516 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 680/701 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 405/537 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 555/570 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 700/713 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 647/674 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 350/440 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 405/454 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 594/610 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 750/780 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 405/508 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 790/811 CJ 2 Conjugations For 50 µg Antibody
    READILINK™ : 633/655 CJ 2 Conjugations For 50 µg Antibody
    • Copyright © 2016 Bio-Rad

    Recommended Secondary Antibody

      Recommended Negative Isotype Control

        Useful Reagents

          Recommended Positive Controls

            Histology Controls

              Write your review

              You may also be interested in...